All Geared Lathe Machine
We are one of the eminent company, involved in offering a wide range of All Geared Lathe Machine. Manufactured to perfection, this machine is widely used in various industries for carrying out cutting, drilling and deformation operations. According to international quality standards and norms, our provided machine is provided to customers in different sizes, specifications and models at affordable prices. Also, we test these All Geared Lathe Machine on certain well-defined parameters to remove defects, if any.
Features:
- Excellent performance
- Easy installation
- Low maintenance
- Long shelf life
| Tecnical Specification (MM) | |
| Perticular | 250 |
| Description | |
| Height of Centre(mm) | 250 |
| Swing Over Bed (mm) | 490 |
| Swing Over Cross Slide (mm) | 290 |
| Distance Between Center (mm) | 965mm |
| Max. Swing in Gap (mm) | 770 |
| BED | |
| Bed Type | 2 V & 2 Flat |
| Bed Width (mm) | 325 |
| Length of Gap in Front of Face Plate (mm) | 240 |
| HEAD STOCK | |
| Number of Feeds | 18 |
| Spindel Speed Range : R.P.M. | 32 TO 1650 |
| Spindle Bore ( mm) | 55 |
| Spindle Taper Number | MT – 4 |
| FEEDS AND THREADS | |
| Number of Feeds | 76 |
| Range of longitudinal Feeds (mm/Rev) | 0.026 to 0.936 |
| Range of Cross Feeds (mm/rev) | 0.016 to 0.62 |
| Number of Threads | 106 |
| Range of Metric Threads/No. | 0.2 to 7 mm (33) |
| Range of Inch Threads,No. | 72 to 4 TPI (36) |
| Range of Module Threads/No. | 0.3 to 3 Module (16) |
| Range of D.P. Threads/No. | 44 to 8 D.P. (21) |
| Leed Screw Dia (mm) | 38.1 |
| Leed Screw Pitch (mm) | 6 mm |
| SADDLE | |
| Cross Slide Dimension (mm) | 460 x 205 |
| Cross Slide Travel (mm) | 200 |
| Compound Slide Traverse (mm) | 150 |
| TAIL STOCK | |
| Spindle Dia (mm) | 63.5 |
| Spindle Taper Number | MT-4 |
| Spindle Travel | 175 |
| Lateral Move to Tail Stock (mm) | 5 |
| MOTOR | |
| Main MKotor (Kw.) | 3 |
STANDARD ACCESSORIES
Four Position Tool Post, Toolpost Spanners, Center Adopter, 2 Nos. MT-3 Dead Centers, Electric Motor with Electrical Controls, Thread Dial Indicator, Camlock operating Handle, Chip Tray.
EXTRA ACCESSORIES
|
»
|
Collet attachment |
»
|
Machine Lamp |
»
|
Quick change Tool Post |
|
»
|
Collet ( 1 mm to 25 mm ) each collet cost |
»
|
Chuck Flange 8″ |
»
|
Coolant Pump & Fitting |
|
»
|
Collet ( 4 mm to 40 mm ) each collet cost |
»
|
Chuck Flange 10″ |
»
|
Carrier Plate |
|
»
|
Taper Turning Attachment |
»
|
Face plate ( 350 mm Dia ) |
»
|
Extra Center Height 2″ |
|
»
|
Rear Tool Post |
»
|
Follow Rest |
»
|
Digital Read out System (DRO) |
|
»
|
Mechanical Brake |
»
|
Steady Rest |
Reviews
There are no reviews yet.